6 OR 12 POLE COMPETITION WEAVES - YOU CHOOSE
If you have a need for an economical alternative to competition weaves - Check out our newly developed insert that converts our 2x2 trainers into "mock" competition weaves.
http://www.agilitystuff.co.nz/weave-trainers-2x2.html
Our weave bases are manufactured to order from 9mm aluminium with alternating outriggers, which avoid the dog's footfall.
All edges have been smoothed and corners rounded to avoid danger to human or dog.
The aluminium bases will enjoy a long and rust-free life. The bases can be rubber chipped in the colour of your choice for an additional charge of $120 per 12 pole set.
We are able to band the PVC pipe with coloured stripes and so each pole will have three 50 mm bands. Choose from Black, Blue, Green, Cerise, Purple, Lemon or Orange (or some combination of three)
Prices shown below.
With effect from 15 March 2025.
Set of 6 - $400.00 + GST
Set of 12 - $800.00 + GST
Bridge and two extra poles are free with each 12 pole set
All edges have been smoothed and corners rounded to avoid danger to human or dog.
The aluminium bases will enjoy a long and rust-free life. The bases can be rubber chipped in the colour of your choice for an additional charge of $120 per 12 pole set.
We are able to band the PVC pipe with coloured stripes and so each pole will have three 50 mm bands. Choose from Black, Blue, Green, Cerise, Purple, Lemon or Orange (or some combination of three)
Prices shown below.
With effect from 15 March 2025.
Set of 6 - $400.00 + GST
Set of 12 - $800.00 + GST
Bridge and two extra poles are free with each 12 pole set
"Bridge"
Each six pole section is designed without ends protruding beyond the last pole and there is a "bridge" to join two sections to create a 12 pole set.
The bases weigh approximately 15kg per section, which makes them robust and suitable for use indoors, but still be moved easily by one person.
The bases weigh approximately 15kg per section, which makes them robust and suitable for use indoors, but still be moved easily by one person.
"Dowel Support"
The actual pole supports are not cups but 22.2mm aluminium dowels (140mm long for added strength for the pole) with smoothed edges to accommodate a 23mm ID pole that has an outside diameter of 26mm.
"Set of Six"
Each section is identical - no need to figure out which way to set out or to join with the bridge.
Peg holes are allocated at each outrigger
Peg holes are allocated at each outrigger
Rubber Chipped Weave Bases
|
Pictured to the left are two sets recently supplied in our area where the customers liked the idea of additional colour. The chip also ensures the base stays cool to the touch even in the hottest Summer. |